소개

In this guide, you will need very few tools to replace your header panel. This is a fast, and safe way to replace your header panel. Out of caution, before completing make sure your vehicle is shut off, and your emergency break is applied.

  1. Remove the 5 screws with the screwdriver to remove the grill.
    • Remove the 5 screws with the screwdriver to remove the grill.

  2. Set aside the windshield fluid/coolant reservoir by removing the 11mm bolt.
    • Set aside the windshield fluid/coolant reservoir by removing the 11mm bolt.

  3. Remove the two screws on top of the headlight bezel, and the two 11mm bolts on the back of the bezel.
    • Remove the two screws on top of the headlight bezel, and the two 11mm bolts on the back of the bezel.

    • Then, remove the bolts from the housing. Repeat this step for the other headlight.

  4. Remove the bolts retaining the header panel using the 8mm socket and ratchet.
    • Remove the bolts retaining the header panel using the 8mm socket and ratchet.

  5. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  6. Remove the headlight bulbs from the headlight housing by turning them counterclockwise on the retaining clip.
    • Remove the headlight bulbs from the headlight housing by turning them counterclockwise on the retaining clip.

  7. Remove the old header panel, and install the replacement panel.
    • Remove the old header panel, and install the replacement panel.

  8. Replace all of the bolts that retain the header panel.
    • Replace all of the bolts that retain the header panel.

  9. Reinstall the headlight bulbs by turning clockwise on the retaining clip.
    • Reinstall the headlight bulbs by turning clockwise on the retaining clip.

  10. Reinstall the headlight bezels after reinserting the marker lights with the two screws, and two 11mm bolts.
    • Reinstall the headlight bezels after reinserting the marker lights with the two screws, and two 11mm bolts.

  11. Reinstall the windshield fluid/coolant reservoir with the 11mm bolt.
    • Reinstall the windshield fluid/coolant reservoir with the 11mm bolt.

  12. Reinstall the grill with the 5 screws.
    • Reinstall the grill with the 5 screws.

결승점

Madison Whitcraft

회원 가입일: 2018년 09월 24일

193 평판

안내서 1개 작성함

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 45