기기를 수리하세요 커뮤니티 상점

1997-2006 Jeep Wrangler (TJ) Headlight Replacement

소개

With enough time, any lightbulb will burn out, and headlights are no different.

This guide demonstrates how to change a headlight in a 1997-2006 Jeep Wrangler. As opposed to many vehicles, the entire headlight assembly for this model must be replaced, not just the bulb. This guide will aid in disassembly and reassembly of the external and internal headlight bracket.

This is a straight forward process, requiring basic tools and less than an hour of your time.

Ensure that your vehicle is turned off and the emergency brake is engaged before beginning the repair.

필요한 것

  1. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement, Headlight: 1 단계, 이미지 1/1

    • Unclasp and prop up the hood.

    편집

  2. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 2 단계, 이미지 1/1

    • Remove the three 15.9 mm screws around the external ring casing with a Phillips #0 screwdriver.

    편집

  3. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 3 단계, 이미지 1/1

    • Pull out the external ring casing.

    편집

  4. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 4 단계, 이미지 1/2 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 4 단계, 이미지 2/2

    • Remove the four screws securing the internal ring casing with a T15 Torx screwdriver.

    편집

  6. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 5 단계, 이미지 1/1

    • Disconnect the headlight assembly from the vehicle by pulling the connector directly out of the back port.

    편집

  7. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 6 단계, 이미지 1/1

    • Realign the internal bracket to match the screw holes.

    편집

  8. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 7 단계, 이미지 1/1

    • Reinstall the four screws securing the internal ring casing with a T15 Torx screwdriver.

    편집

  9. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 8 단계, 이미지 1/1

    • Realign the external bracket to match the screw holes.

    편집

  10. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 9 단계, 이미지 1/1

    • Replace the three 15.9 mm screws using a Phillips #0 screwdriver.

    편집

  11. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: 10 단계, 이미지 1/1

    • Close and clasp the hood back to its original position.

    편집
결론

Enjoy your bright new headlight(s)!

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Troy Taylor

회원 가입일: 02/28/22

199 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

University of Memphis, Team 2-10, Willis Spring 2022 University of Memphis, Team 2-10, Willis Spring 2022 회원

UM-WILLIS-S22S2G10

1 회원

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 10

7일 전: 32

30일 전: 107

전체 시간: 3,291