1. Use a #2 Phillips screwdriver to remove the four screws.
    • Use a #2 Phillips screwdriver to remove the four screws.

  2. Remove the rubber gasket from the rain tray.
    • Remove the rubber gasket from the rain tray.

  3. Lift the tray upwards and away from the vehicle.
    • Lift the tray upwards and away from the vehicle.

  4. Use a flathead screwdriver to remove the cap from the windshield wiper.
    • Use a flathead screwdriver to remove the cap from the windshield wiper.

  5. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  6. Use a socket wrench to release the passenger-side windshield wiper locking nut.
    • Use a socket wrench to release the passenger-side windshield wiper locking nut.

  7. Gently lift up the passenger-side windshield wiper. Gently lift up the passenger-side windshield wiper.
    • Gently lift up the passenger-side windshield wiper.

  8. Remove the driver-side windshield wiper in the same fashion.
    • Remove the driver-side windshield wiper in the same fashion.

  9. Lift up the plastic cover. Lift up the plastic cover.
    • Lift up the plastic cover.

  10. Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover. In a pinch, you can make this tool with a phillips driver bit and end wrench.
    • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

    • In a pinch, you can make this tool with a phillips driver bit and end wrench.

  11. Use a #2 Phillips screwdriver to remove the front two screws.
    • Use a #2 Phillips screwdriver to remove the front two screws.

  12. Gently unplug and lift out the automatic transmission control unit. Gently unplug and lift out the automatic transmission control unit.
    • Gently unplug and lift out the automatic transmission control unit.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Matthew Newsom

회원 가입일: 2010년 01월 05일

32,793 평판

안내서 67개 작성하였습니다

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - 답글

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - 답글

got a question if your display light is dim what could be the problem

dean wafula - 답글

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - 답글

댓글 쓰기

조회 통계:

지난 24시간: 7

지난 7일: 32

지난 30일: 183

전체 시간: 32,618