주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide gives step-by-step instructions to replace the XtraVision Fog Light/Headlight Bulb 9005XV-2 in a 2017 Kia Niro. Fog Light/Headlight bulb usually burns out after 1000 hours and it needs to be replaced but some others last for 30000 hours. When replacing Fog Light/Headlight Bulb 9005XV-2 in a 2017 Kia Niro, Fog Light/Headlight Bulb should be changed in pairs. For safety concerns, Bulbs should be changed before they burned out because driving without functioning bulbs can be dangerous at night.

도구

지정된 도구가 없습니다.

부품

  1. Open the hood of the vehicle and make sure it is secured to prevent injury.
    • Open the hood of the vehicle and make sure it is secured to prevent injury.

  2. Locate the bulb cover cap which can be found under the hood and directly behind the headlight.
    • Locate the bulb cover cap which can be found under the hood and directly behind the headlight.

  3. Remove the bulb cover cap by rotating it counter-clockwise until it is fully detached.
    • Remove the bulb cover cap by rotating it counter-clockwise until it is fully detached.

  4. Place the cap in a location that is out of the way of your work area and where you can easily find it.
    • Place the cap in a location that is out of the way of your work area and where you can easily find it.

  5. Remove the old bulb by rotating counter-clockwise until it is detached, being careful not to drop the bulb into the hood of the vehicle.
    • Remove the old bulb by rotating counter-clockwise until it is detached, being careful not to drop the bulb into the hood of the vehicle.

  6. Prepare your replacement XtraVision Fog Light/Headlight Bulb 9005XV-2 for installation by removing it from the packaging and ensuring that the bulb is not broken.
    • Prepare your replacement XtraVision Fog Light/Headlight Bulb 9005XV-2 for installation by removing it from the packaging and ensuring that the bulb is not broken.

  7. Insert the new bulb by pushing it into the bulb compartment.
    • Insert the new bulb by pushing it into the bulb compartment.

    • Turn the bulb clockwise until it is secure.

  8. Reattach the cap you previously set aside by rotating clockwise until secure.
    • Reattach the cap you previously set aside by rotating clockwise until secure.

결승점

Sydney Harper

회원 가입일: 2020년 10월 23일

157 평판

안내서 1개 작성함

Texas Tech, Team S9-G6, Cowan Fall 2020 Texas Tech, Team S9-G6, Cowan Fall 2020 회원

TTU-COWAN-F20S9G6

1 회원

안내서 1개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 15

전체 시간: 77