기기를 수리하세요 커뮤니티 상점

2008-2012 Honda Accord Headlight Bulb Replacement

소개

Headlights are a critical component to ensure safety on the road for both yourself and other drivers. Knowing how to replace your headlight can save you time and money if your headlight is either damaged or worn out.

필요한 것

  1. 2008-2012 Honda Accord Headlight Bulb Replacement, Headlight Bulb: 1 단계, 이미지 1/1

    • (Right Side Headlight)

    • Turn the wheel all the way inward to have enough clearance.

    • Turn the vehicle fully off before proceeding to the next step.

    편집

  2. 2008-2012 Honda Accord Headlight Bulb Replacement: 2 단계, 이미지 1/3 2008-2012 Honda Accord Headlight Bulb Replacement: 2 단계, 이미지 2/3 2008-2012 Honda Accord Headlight Bulb Replacement: 2 단계, 이미지 3/3

    • Locate the inner fender's retainer clips.

    • Using a flat-head screwdriver, pry out the retainer clips.

    편집

  4. 2008-2012 Honda Accord Headlight Bulb Replacement: 3 단계, 이미지 1/1

    • Pry back the inner fender liner to gain access to the headlight bulb.

    • An object may be needed to keep the fender liner pulled back

    편집

  5. 2008-2012 Honda Accord Headlight Bulb Replacement: 4 단계, 이미지 1/3 2008-2012 Honda Accord Headlight Bulb Replacement: 4 단계, 이미지 2/3 2008-2012 Honda Accord Headlight Bulb Replacement: 4 단계, 이미지 3/3

    • Locate the headlight bulb, and turn the item clockwise so that it points towards the engine.

    • For the left bulb, turn the item counter clock-wise

    편집

  6. 2008-2012 Honda Accord Headlight Bulb Replacement: 5 단계, 이미지 1/2 2008-2012 Honda Accord Headlight Bulb Replacement: 5 단계, 이미지 2/2

    • Pull out the headlight bulb from its socket.

    • Be careful while pulling the bulb out, you might damage the bulb or its connected cable.

    편집

  7. 2008-2012 Honda Accord Headlight Bulb Replacement: 6 단계, 이미지 1/3 2008-2012 Honda Accord Headlight Bulb Replacement: 6 단계, 이미지 2/3 2008-2012 Honda Accord Headlight Bulb Replacement: 6 단계, 이미지 3/3

    • For a more visible view of this step since the space is small and cluttered. -Credit for these 3 pictures: @PrecisionLED

    • To disconnect the bulb, pinch the top of the white block to release it from the bulb

    • When installing a new bulb, be careful while handling the bulb to not smudge or damage the bulb.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Carson Nguyen

회원 가입일: 10/23/23

133 평판

안내서 1개 작성함

배지: 2

팀

CSU Los Angeles, Team 5-16, Kershman Fall 2023 CSU Los Angeles, Team 5-16, Kershman Fall 2023 회원

CSULA-KERSHMAN-F23S5G16

1 회원

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 9

7일 전: 109

30일 전: 464

전체 시간: 1,663