2008 Honda Fit Inner Door Grip Replacement

소개

If you have a broken inner door grip on your 2008 Honda Fit, you can follow this guide to learn how to replace it.

One can experience discomfort when resting your arm or closing the door due to a broken inner door grip in your car. When replacing the door grip, use the correct part: the 07-08 Honda Fit Left Front Door Grip Cover NH167L (Graphite Black). Following the steps in this guide, you can easily install the new grip and restore full functionality to your car's door.

Before beginning this guide, place the car in park, power off the ignition, and engage the parking brake.

1 단계 Inner Door Grip

2008 Honda Fit Inner Door Grip Replacement, Inner Door Grip: 1 단계, 이미지 1/1

Park the car on a level surface and engage the parking brake.

편집

2 단계

Open the door to access the interior door panel. Remove any dirt or tape from the door handle.
Remove the taped or broken inner door handle from the inner door panel of the car.

편집

3 단계

2008 Honda Fit Inner Door Grip Replacement: 3 단계, 이미지 3/3

Retrieve the door grip and hook the door grip to the panel by the hook that is attached to the door panel.

편집

4 단계

Once the door grip is hooked to the door panel, the door grip will hang.

편집

5 단계

2008 Honda Fit Inner Door Grip Replacement: 5 단계, 이미지 3/3

Starting with the right side, adjust the door grip to the claw attached to the door panel's right side.
Push the door grip gently.

편집

6 단계

2008 Honda Fit Inner Door Grip Replacement: 6 단계, 이미지 3/3

Push the door grip to the claw attached to the door panel to lock the door grip so it attaches.

편집

7 단계

2008 Honda Fit Inner Door Grip Replacement: 7 단계, 이미지 3/3

Insert the door grip into the center of the door panel that has two holes.
Make sure the centerpiece of the door grip is aligned with the center holes of the door panel for it to attach properly.

편집

8 단계

Push the door grip to the claws on the top center of the door panel so it attaches.

편집

9 단계

2008 Honda Fit Inner Door Grip Replacement: 9 단계, 이미지 3/3

Finally, press the left side of the door grip to the far left of the door panel to align with the door clips so that it holds the left side balancing the right.

편집