주요 콘텐츠로 건너뛰기

2010 Toyota Camry SE Dome Light Bulbs Replacement

필요한 것

  1. 2010 Toyota Camry SE Dome Light Bulbs Replacement, Dome Light Bulbs: 1 단계, 이미지 1/1
    • Use one hand to push up on the roof surrounding the plastic cover and utilize a flathead screwdriver to gently pry out light fixture and cover.

  2. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 2 단계, 이미지 1/1
    • Starting with the 2 clips on each side of the light, remove the 10 clips on the fixture.

    • The user should loosen every clip before removing fixture.

  3. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 3 단계, 이미지 1/1
    • Once the clips are loose, pop off the plastic cover grey plastic cover.

  4. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 4 단계, 이미지 1/1
    • Using hose pliers, pull out the bulb being replaced.

    • Now, insert new bulb by securing it into socket and pushing into place.

  5. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 5 단계, 이미지 1/1
    • Reinstall plastic light fixture by pushing cover back into place.

    • Fixture should easily snap back in with proper placement.

  6. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 6 단계, 이미지 1/1
    • Finally, test the new lights by turning them on and off a few times for 30 seconds or so to assure they work properly.

    • If they do not work then the next suggestion would be to check the fuse box before heading to the dealer.

    • Sometimes fuses blow out which can be spotted by careful analysis. If two parts of the fuse do not meet such as disconnected wires then you have a blown fuse.

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

Gabriel Durazo

회원 가입일: 01/28/18

160 평판

안내서 1개 작성함

댓글 한 개

Hi, Thank you for posting this repair solution. Do you think it'll be easy to replace the entire assembly? My bulbs work, but the buttons don't stay on. Thanks.

KPW - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 27

전체 시간: 2,716