2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement

소개

This step-by-step guide demonstrates how to repair a driver-side front pillar trim of a Ford Explorer 2013 XLT though you can use it for your fifth-generation Ford Explorer, years 2011-2019.

When the front pillar trim is cracked, deteriorated, broken, or installed incorrectly it can pose a safety risk as it supports the front windshield. This guide is useful in repairing the front pillar trim of a Ford Explorer 2013 XLT.

필요한 것

1 단계 Driver's Side Front Pillar Trim

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement, Driver's Side Front Pillar Trim: 1 단계, 이미지 1/3

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement, Driver's Side Front Pillar Trim: 1 단계, 이미지 2/3

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement, Driver's Side Front Pillar Trim: 1 단계, 이미지 3/3

Gently apply even force to separate the exterior pillar trim from the interior pillar trim.
The external pillar trim could break off but don't worry—a replacement part will be installed in its place.

편집

2 단계

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement: 2 단계, 이미지 3/3

Use a ratchet socket and an 8 mm socket attachment to remove the six bolts from the interior pillar trim.
If there is a small tab attached at the upper corner, detach it by gently lifting and separating it from the trim.
Bolts should be unscrewed and then carefully placed in a location to prevent loss or misplacing.

편집

3 단계

Remove the damaged interior pillar trim and clean surrounding areas.
Use a rag and glass cleaner to clean the pillar trim area.
Avoid contact with skin, eyes and clothing. Wash thoroughly after handling.
Remove any remaining residue from the window and metal. Use as much window cleaner as necessary.

편집

4 단계

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement: 4 단계, 이미지 3/3

Align the new interior pillar trim part precisely with the corresponding holes on the vehicle.
Ensure they are aligned precisely and apply pressure.

편집

5 단계

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement: 5 단계, 이미지 3/3

While maintaining downward pressure on the interior pillar trim, secure the six bolts into place.
Alternate one bolt at a time, bottom to top.

편집

6 단계

2011-Present Ford Explorer Driver Side Front Pillar Trim Replacement: 6 단계, 이미지 3/3

Align the small white head connections with the yellow points on the exterior trim, and then firmly snap the push tabs into place to secure the trim.
To guarantee a safe connection, gently press down after the white push tabs are aligned.
Remove the yellow markup sticker after inserting the tabs.