이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Here we have the front view of the FZ-1 3DO.
-
Note the ports on the back of the unit. The FZ-1 comes with RF, S-Video, and Composite Outputs, as well as a expansion port on the back of the unit.
-
A larger 2nd expansion slot can be found on the right side of the unit.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Flip the unit over, so that the bottom side of the case is facing up towards you, exposing the four screws casing screws.
-
Remove the four #2 Phillips Screws from the casing.
-
After the screws are removed, flip the unit back over while holding the top and bottom pieces of the case together.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the 2 #1 Phillips Screws from the back of the Disc Drive Shield.
-
Using a Spudger, carefully pry up the four metal tabs to remove the disc drive cover.
-
Remove the 4 #2 Phillips Screws.
-
Remove the disc drive shield, and the two bars you just unscrewed.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the 5 #1 Phillips Screws holding the CD Drive to the motherboard.
-
Carefully unplug the two ribbon cables connecting the CD drive to the motherboard.
-
You can now safely remove the CD drive from the case.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the 11 #1 Phillips Screws connecting the metal shield to the motherboard.
-
Remove the metal shield.
-
Remove the metal cover from the expansion port.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the #1 Phillips Screw from back port cover, and then remove the cover.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the plastic cover, power and eject buttons found at the front end of the unit.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unplug the power and fan cables from the motherboard.
-
Remove the 2 #2 Phillips Screws holding the power supply to the case.
-
Remove the power supply and fan from the case.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unplug the ribbon cable connecting the motherboard to the controller port board.
-
Remove the controller board and motherboard.
-
다른 6명이 해당 안내서를 완성하였습니다.
댓글 2개
Can you tell me what size the screws are? I need to order a replacement set for my FZ-1
I thought I couldn't fix this old appliance in my house. Until I came across this site! Thank you. :)