ASUS K53E-BBR1 Keyboard Replacement

소개

This guide is intended to demonstrate how to replace a malfunctioning keyboard on the ASUS K53-E-BBR1. You will need an opening tool to remove the keyboard. Also be cautious of the ribbon cable connecting the keyboard to the laptop.

필요한 것

1 단계 Keyboard

ASUS K53E-BBR1 Keyboard Replacement, Keyboard: 1 단계, 이미지 1/1

Lift the monitor up so that the keyboard is visible.
You will notice five spots on the top of the keyboard where the iFixit opening tool should be placed.

편집

2 단계

ASUS K53E-BBR1 Keyboard Replacement: 2 단계, 이미지 3/3

Use the iFixit opening tool on each of the designated spots to pry the keyboard apart from the palm rest.
You will hear a light "pop" sound each time you pry the keyboard.
Once the keyboard is loose, do not pull keyboard far (more than 3 inches) apart from the from the palm rest. There is a "bus" connector attached to the bottom.

편집

3 단계

Carefully disconnect the "bus" connector from the laptop. Press on it with your thumb/index finger and slide it right along the surface of the laptop.

편집