ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement

소개

This guide goes over how to replace the M.2 SSD for the ASUS ROG Strix GL503VD-DB71 laptop using the quick access compartment found on the bottom of the laptop. Before starting, ensure that you have a compatible M.2 SSD for the laptop and the proper tools.

필요한 것

1 단계 M.2 Solid State Drive

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: 1 단계, 이미지 1/2

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: 1 단계, 이미지 2/2

Completely turn off the laptop, lay it on a flat surface, and turn it over.

편집

2 단계

Using a plastic pry tool, pry off the rubber tab to reveal the screw underneath.

편집

3 단계

Using a Phillips #0 screwdriver, unscrew the one 2 mm screw that is holding down the compartment cover on the bottom of the laptop.

편집

4 단계

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: 4 단계, 이미지 3/3

With a plastic pry tool, carefully pry open the cover on the bottom of the laptop starting where the screw was located.
Once part of the cover is popped off, slide your pry tool around the edge of the entire cover until all the connectors unsnap.

편집

5 단계

Locate the M.2 SSD and with a Phillips #0 screwdriver unscrew the 2.5 mm screw holding it down.

편집

6 단계

With your hand, lift up the M.2 SSD and carefully pull it out of the connector slot making sure not to apply to much pressure.

편집

7 단계

Take your new M.2 SSD and slide it back into the connector slot face up until it is fully in.
Some connection pads on M.2 SSDs are very fragile and can be broken easily.

편집

8 단계

Take the 2.5 mm screw that was holding down the M.2 SSD and with a Phillips #0 screwdriver screw it back into the slot to hold down the new M.2 SSD.

편집

9 단계

Take the bottom panel and align it so the shape fits to the opening.
Slide the left side of the cover back into the slot first so that the two extrusions fit into their openings.

편집