주요 콘텐츠로 건너뛰기
    • Make sure your device is unplugged and turned off before proceeding.

    • Using a Spudger, gently pry up the keyboard.

    • Rotate the keyboard to face downward.

    • Pull out the blue wiring connection. Use tweezers to make it easier to remove.

  1. Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.
    • Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.

  2. Slide the disk drive out of the device.
    • Slide the disk drive out of the device.

  3. Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive. Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive. Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.
    • Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.

  4. Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard. Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.
    • Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.

    • Pull up on the front panel using the spudger until the front panel separates from the bottom panel.

  5. Unscrew and remove the marked screws.
    • Unscrew and remove the marked screws.

  6. Separate the connectors.
    • Separate the connectors.

  7. Remove the motherboard from the device. Remove the motherboard from the device.
    • Remove the motherboard from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Robert Martinez

회원 가입일: 2018년 09월 21일

217 평판

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 13

전체 시간: 136