메인 콘텐츠로 스킵하기

소개

In this guide we will be going through the process of replacing the keyboard. Be sure to keep track of screws by placing them in a cup or bowl while working on the laptop!

부품

지정된 부품이 없습니다.

  1. Power off laptop. Flip over the laptop  so the model stickers are pointing towards the ceiling.
    • Power off laptop.

    • Flip over the laptop so the model stickers are pointing towards the ceiling.

  2. Use a Phillips  #0  screwdriver to remove the six 10.5mm screws (shown in red). Use a Phillips #0 screwdriver to remove the four 5.5mm screws (shown in orange).
    • Use a Phillips #0 screwdriver to remove the six 10.5mm screws (shown in red).

    • Use a Phillips #0 screwdriver to remove the four 5.5mm screws (shown in orange).

  3. Turn over the laptop with the keyboard facing upwards. Insert a plastic opening tool under the edge of the laptop.
    • Turn over the laptop with the keyboard facing upwards.

    • Insert a plastic opening tool under the edge of the laptop.

  4. After  prying open all sides of the laptop, carefully remove the keyboard from the laptop. Carefully remove the two cables connecting the keyboard to the laptop by popping up the white clips and sliding the connector out. Carefully remove the two cables connecting the keyboard to the laptop by popping up the white clips and sliding the connector out.
    • After prying open all sides of the laptop, carefully remove the keyboard from the laptop.

    • Carefully remove the two cables connecting the keyboard to the laptop by popping up the white clips and sliding the connector out.

결론

To reassemble your device, follow these instructions in reverse order.

Spencer Lee

회원 가입일: 2018년 11월 01일

253 평판

안내서 2개 작성하였습니다

IUPUI, Team S2-G4, Harley Fall 2018 IUPUI, Team S2-G4, Harley Fall 2018 회원

IUPUI-HARLEY-F18S2G4

3 회원들

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 14

전체 시간: 144