주요 콘텐츠로 건너뛰기

Acer AL1714 Power Supply Board

필요한 것

  1. Acer AL1714 Power Supply Board, Power Supply Board: 1 단계, 이미지 1/2 Acer AL1714 Power Supply Board, Power Supply Board: 1 단계, 이미지 2/2
    • Turn the monitor facedown.

    • Unscrew the 5 screws holding the back cover on.

    • (This may require flipping the monitor over and shaking the screws loose once they're already unscrewed)

  2. Acer AL1714 Power Supply Board: 2 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 2 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 2 단계, 이미지 3/3
    • Take the edge tool or a metal ruler and insert it into bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.

  3. Acer AL1714 Power Supply Board: 3 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 3 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 3 단계, 이미지 3/3
    • Remove the Flat Flex Cable from the Power Supply board under the metal cover.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Acer AL1714 Power Supply Board: 4 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 4 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 4 단계, 이미지 3/3
    • Unscrew the cord anchors for the VGA port.

    • (Use needle nose pliers if they're too tight for removal by hand)

  5. Acer AL1714 Power Supply Board: 5 단계, 이미지 1/2 Acer AL1714 Power Supply Board: 5 단계, 이미지 2/2
    • Turn the monitor around.

    • Unscrew the 1 screw holding the Flat Power Cable cover in place.

    • Lift up and remove the Flat Power Cable cover.

    • (Careful: it may be sharp)

  6. Acer AL1714 Power Supply Board: 6 단계, 이미지 1/1
    • Unscrew the 5 screws holding the metal cage on.

  7. Acer AL1714 Power Supply Board: 7 단계, 이미지 1/2 Acer AL1714 Power Supply Board: 7 단계, 이미지 2/2
    • Turn the monitor around.

    • Lift up on the back of the metal cage slightly.

    • Pull the cage toward self.

    • (Must be careful to free the cover of the VGA port and power supply input)

  8. Acer AL1714 Power Supply Board: 8 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 8 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 8 단계, 이미지 3/3
    • Lift up on the Flat Flex Cable holder tabs to release the cords.

    • Lift up on the Flat Flex Cables and bend them out of the working area.

  9. Acer AL1714 Power Supply Board: 9 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 9 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 9 단계, 이미지 3/3
    • Unplug the 4 backlight wires from their ports on the Power Supply Board.

    • (Considering their size, the best way to unplug the backlight wires is by slowly jiggling and pulling the wires out of place)

  10. Acer AL1714 Power Supply Board: 10 단계, 이미지 1/1
    • Unscrew the 5 screws holding the joined Power Supply and Video Display boards on.

  11. Acer AL1714 Power Supply Board: 11 단계, 이미지 1/2 Acer AL1714 Power Supply Board: 11 단계, 이미지 2/2
    • Lift and remove the joined Power Supply and Video Display boards.

  12. Acer AL1714 Power Supply Board: 12 단계, 이미지 1/3 Acer AL1714 Power Supply Board: 12 단계, 이미지 2/3 Acer AL1714 Power Supply Board: 12 단계, 이미지 3/3
    • Carefully detach the Power Supply and Video Display boards at their connector joint.

    • Replace the Power Supply Board with a new part.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Christopher Kelly

회원 가입일: 09/25/14

590 평판

안내서 4개 작성하였습니다

USF Tampa, Team 1-3, Brown Fall 2014 USF Tampa, Team 1-3, Brown Fall 2014 회원

USFT-BROWN-F14S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 10

전체 시간: 1,238