부품

부품은 필요하지 않습니다.

  1. Remove the battery
    • Remove the battery

    • Turn the laptop so that the lid touches the table and unscrew the screws. There are 14 long ones and 2 short ones.

  2. Pop up the keyboard with a flat screw driver. Pay attention to the connector between the keyboard and the mother board.
    • Pop up the keyboard with a flat screw driver. Pay attention to the connector between the keyboard and the mother board.

    • Disconnect the keyboard from the motherboard by lifting the black part of the FPC connector.

    • Unscrew 8 screws.

    • Disconnect the two flat cables with the FPC connectors as shown in the picture.

    • Detach the lid and disconnect the sound card reader (red/black cable pair).

    • Unscrew the four screw in the screen lid.

    • Slide out the 4 lockers on the side of the screen. Be careful not to have the screen touch the motherboard as it might scratch the surface of the screen.

    • Disconnect the screen from the motherboard.

    • Connect the new screen and make sure to tape the cable to the screen (the connector should have a tape, if not, add one).

결론

To reassemble your device, follow these instructions in reverse order.

contact@kbl.netlib.re

회원 가입일: 2018년 09월 27일

97 평판

안내서 3개 작성하였습니다

조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 29

전체 시간: 29