주요 콘텐츠로 건너뛰기

소개

In this guide you will learn to remove your current Acer Aspire M5 fan and then you can repeat the steps in reverse to install a new one.

  1. Remove all 18 of the marked screws (2.12 mm) using a Phillips #1 Screwdriver.
    • Remove all 18 of the marked screws (2.12 mm) using a Phillips #1 Screwdriver.

  2. Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device. Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device.
    • Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device.

  3. Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver. Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver.
    • Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver.

  4. After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it  is unplugged, then you will be able to remove the fan completely. After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it  is unplugged, then you will be able to remove the fan completely.
    • After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it is unplugged, then you will be able to remove the fan completely.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Jarrett Tuggle

회원 가입일: 2018년 01월 29일

236 평판

안내서 1개 작성함

University of Alabama, Team S1-G4, Bedsole Spring 2018 University of Alabama, Team S1-G4, Bedsole Spring 2018 회원

UA-BEDSOLE-S18S1G4

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 230