부품

부품은 필요하지 않습니다.

  1. Shut the netbook off (Power down netbook at top left corner).
    • Shut the netbook off (Power down netbook at top left corner).

  2. Close the netbook and flip it over so that the back is facing up.
    • Close the netbook and flip it over so that the back is facing up.

  3. Slide the button below the battery to the right while simultaneously pulling the battery out.
    • Slide the button below the battery to the right while simultaneously pulling the battery out.

  4. Remove the old battery and get the replacement battery. Remove the old battery and get the replacement battery.
    • Remove the old battery and get the replacement battery.

  5. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  6. Check the thin groves on the side of the battery entry and line the replacement battery up to that.
    • Check the thin groves on the side of the battery entry and line the replacement battery up to that.

  7. Use the wedge tool to pluck off the keyboard key.
    • Use the wedge tool to pluck off the keyboard key.

    • If it's just a broken key just pluck the broken key out and take the new replacement key and press it down over the mechanism. If you need to repair the key follow the steps below.

  8. With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket. With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket.
    • With the wedge tool pull up on the upper portion on both sides of the mechanism until it pops off from the key socket.

  9. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat. Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat.
    • Take both pivoting pieces of the mechanism and put them together. The smaller piece fits through the inner part of the larger piece and lays in the grove of the larger piece. Once assembled it should be entirely flat.

  10. Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket. Then slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.
    • Position the pivoting smaller piece of the key mechanism in the lower hooks of the key socket. Then slide your finger across the upper portion of the key mechanism so that it locks in place with the upper hooks of the key socket.

  11. Place the key freely on top of the mechanism and press it down firmly until the key locks in place.
    • Place the key freely on top of the mechanism and press it down firmly until the key locks in place.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Christian Barboza

회원 가입일: 2015년 10월 25일

791 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-6, Gulbrandsen Fall 2015 회원

UMASSD-GULBRANDSEN-F15S5G6

3 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 13

지난 30일: 35

전체 시간: 1,877