이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the top and middle grips that conceal 3 additional screws.
-
Remove the (8) 10mm T9 screws.
-
Remove the (5) 6mm T9 screws.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unscrew the (2) 3mm Philips #0 wide head screws.
-
Carefully disconnect the speaker connection.
-
Remove the speaker.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Disconnect the speaker from the main board.
-
Unscrew the (2) 3mm Philips #0 wide head screws.
-
Remove the speaker.
-
거의 끝나갑니다!
결승점