Acer Iconia B1-A71 Touch Screen Glass Replacement

소개

We well show you how to disassemble / take apart the tablet and how to change / replace the Touch screen. Before replacing, try to reconnect only the Touchscreen flex cable. Manual for this you can find on Acer Iconia B1 main page.

Please SUBSCRIBE to my channel ツ

필요한 것

동영상 개요

1 단계 Acer Iconia B1-A71 Touch Screen Glass Replacement

Acer Iconia B1-A71 Touch Screen Glass Replacement, Acer Iconia B1-A71 Touch Screen Glass Replacement: 1 단계, 이미지 1/3

Acer Iconia B1-A71 Touch Screen Glass Replacement, Acer Iconia B1-A71 Touch Screen Glass Replacement: 1 단계, 이미지 2/3

Acer Iconia B1-A71 Touch Screen Glass Replacement, Acer Iconia B1-A71 Touch Screen Glass Replacement: 1 단계, 이미지 3/3

Because I can't switch-off the tablet, I'm using the reset button to do this.
With a cutter and a plastic tool remove the back cover.
If you have a memory card inside, don't forget to remove it!

번역하기

2 단계

First, disconnect the battery.
Now, disconnect the loudspeaker and remove the back cover.
Remove all scotch tapes and disconnect the touch screen flex cable...
LCD display flex cable,
the microphone,
and the WiFi and Bluetooth antennas flex cables.

번역하기

3 단계

Acer Iconia B1-A71 Touch Screen Glass Replacement: 3 단계, 이미지 3/3

Unscrew 5x screws and rmove the main board.

번역하기

4 단계

Acer Iconia B1-A71 Touch Screen Glass Replacement: 4 단계, 이미지 3/3

The battery is glued to the LCD display metal shield with a double sided adhesive tape.
Use plastic tools and carefully remove it.
Remove all tapes from the LCD display metal shield.

번역하기

5 단계

Acer Iconia B1-A71 Touch Screen Glass Replacement: 5 단계, 이미지 3/3

The LCD display is held by metal frame and some locking clips on it.
Use a cutter and a plastic tool to separate the LCD.
You have to work slowly so as not to break the display.
Now, install the new LCD display and reassemble the tablet.

번역하기

6 단계

Acer Iconia B1-A71 Touch Screen Glass Replacement: 6 단계, 이미지 3/3

Warm up the touch screen.
Start separating from one of the corners. With a cutter, make place for a plastic tool.
Keep warm the touchscreen to separate it easily.
For us is important to keep only the frame.