주요 콘텐츠로 건너뛰기

Acer Iconia Tab 8 A1-840 Speaker Replacement

필요한 것

  1. Acer Iconia Tab 8 A1-840 Speaker Replacement, Back Panel: 1 단계, 이미지 1/1
    • Power off the device

    • Remove any cables that might be connected to your device

    • Make sure the device is placed on a flat surface with the display screen facing up

  2. Acer Iconia Tab 8 A1-840 Speaker Replacement: 2 단계, 이미지 1/1
    • Wedge the plastic opening tool in between the display screen and back panel

    • Do not apply too much pressure in order to avoid cracking the screen

  3. Acer Iconia Tab 8 A1-840 Speaker Replacement: 3 단계, 이미지 1/1
    • Carefully separate the display from the back panel

  4. Acer Iconia Tab 8 A1-840 Speaker Replacement, Battery: 4 단계, 이미지 1/1
    • Use your fingers to pull back and remove the yellow plastic tape covering the battery cable.

  5. Acer Iconia Tab 8 A1-840 Speaker Replacement: 5 단계, 이미지 1/1
    • Use the flat end of the spudger to pry up and remove the battery cable.

  6. Acer Iconia Tab 8 A1-840 Speaker Replacement: 6 단계, 이미지 1/1
    • Use the flat side of the heavy duty spudger to lift the small black plastic flap.

  7. Acer Iconia Tab 8 A1-840 Speaker Replacement: 7 단계, 이미지 1/1
    • Use fingers to pull the Zero Insertion Force (ZIF) cable from the motherboard.

  8. Acer Iconia Tab 8 A1-840 Speaker Replacement: 8 단계, 이미지 1/1
    • Use fingers to remove the smaller adjacent ZIF cable from the motherboard.

  9. Acer Iconia Tab 8 A1-840 Speaker Replacement: 9 단계, 이미지 1/1
    • Use the flat end of the spudger to pry the battery up from all edges, and remove it from the back panel.

    • There is adhesive behind the battery that holds it in place. Be sure to pry slowly and carefully when removing the battery.

  10. Acer Iconia Tab 8 A1-840 Speaker Replacement, Speaker: 10 단계, 이미지 1/1
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매
    • Use tweezers or the flat end of the spudger to carefully pull the connection loose.

  11. Acer Iconia Tab 8 A1-840 Speaker Replacement: 11 단계, 이미지 1/1
    • Use the pointy end of the spudger to remove the black tape holding the wires in place and completely free the wires.

  12. Acer Iconia Tab 8 A1-840 Speaker Replacement: 12 단계, 이미지 1/1
    • Use a 5mm nut driver and Philips#000 bit to remove the four 1.5mm screws.

  13. Acer Iconia Tab 8 A1-840 Speaker Replacement: 13 단계, 이미지 1/1
    • Remove the speakers after unscrewing the screws.

  14. Acer Iconia Tab 8 A1-840 Speaker Replacement: 14 단계, 이미지 1/1
    • Use spudger to loosen the wire and free the speaker.

결론

To reassemble your device, follow these instructions in reverse order.

Claire Posadas

회원 가입일: 10/18/16

396 평판

안내서 3개 작성하였습니다

UW Tacoma, Team 1-1, Rose Fall 2016 UW Tacoma, Team 1-1, Rose Fall 2016 회원

UWT-ROSE-F16S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 763