주요 콘텐츠로 건너뛰기

Acer Nitro 5 AN515-55-55M1 Fan Replacement

필요한 것

  1. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Bottom Cover: 1 단계, 이미지 1개 중 1개
    • Make sure the device is off and unplugged from power.

    • Flip the device so the bottom is facing up.

    • Remove 11 screws from the bottom case using a Phillips #1 screwdriver.

  2. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 2 단계, 이미지 2개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 2 단계, 이미지 2개 중 2개
    • Lift the top left and right corners up and away from the device.

    • This may require some force and will make harsh clicking sounds. This is normal; it's the plastic tabs separating from each other.

    • Remove the panel from the laptop.

  3. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: 3 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: 3 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: 3 단계, 이미지 3개 중 3개
    • Use an opening tool to disconnect the battery from the motherboard.

  4. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 4 단계, 이미지 2개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 4 단계, 이미지 2개 중 2개
    • Remove the two screws from the battery with a Phillips #1 screwdriver.

    • Remove the battery by pulling up and out from the left side.

  5. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: 5 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: 5 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: 5 단계, 이미지 3개 중 3개
    • Disconnect the seven cables from the motherboard using an iFixit opening tool.

  6. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 6 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 6 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 6 단계, 이미지 3개 중 3개
    • Use an iFixit opening tool to lift the two Wi-Fi antenna cables up and away from the Wi-Fi card.

  7. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 7 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 7 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 7 단계, 이미지 3개 중 3개
    • Remove the six screws surrounding the fan using a Phillips #1 screwdriver.

    • Remove the two shorter screws from the motherboard using a Phillips #1 screwdriver.

    • Lift the taped wires off of the fans on the right and left sides.

  8. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 8 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 8 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 8 단계, 이미지 3개 중 3개
    • Lift up the right side of the motherboard.

    • The cables may need some guidance to leave the management holes on the motherboard.

    • Continue to lift at an angle until there is a give.

    • Remove the motherboard and fans from the laptop.

  9. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: 9 단계, 이미지 3개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: 9 단계, 이미지 3개 중 2개 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: 9 단계, 이미지 3개 중 3개
    • Unplug the two fan connectors from each side of the motherboard using an opening tool.

  10. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 10 단계, 이미지 2개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 10 단계, 이미지 2개 중 2개
    • Both fans are loose at this point and are only being held in by thermal tape.

    • Lift both fans up on each side and fold over the heat pipe.

  11. Acer Nitro 5 AN515-55-55M1 Fan Replacement: 11 단계, 이미지 2개 중 1개 Acer Nitro 5 AN515-55-55M1 Fan Replacement: 11 단계, 이미지 2개 중 2개
    • Pull the fan away from the heat pipe on both sides of the motherboard.

    • The tape will separate off of the heat pipe.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

1다른 기여자 명과 함께

Samuel Rouillard

회원 가입일: 03/30/21

681 평판

안내서 5개를 작성함

UMass Dartmouth, Team 1-4, Mellen Spring 2022 UMass Dartmouth, Team 1-4, Mellen Spring 2022 회원

UMASSD-MELLEN-S22S1G4

3 회원들

안내서 5개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 5

지난 7일: 15

지난 30일: 53

전체 시간: 1,723