주요 콘텐츠로 건너뛰기

Afterglow Wireless PS3 Controller Button Replacement

필요한 것

  1. Afterglow Wireless PS3 Controller Button Replacement, Back Cover: 1 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement, Back Cover: 1 단계, 이미지 2/2
    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

  2. Afterglow Wireless PS3 Controller Button Replacement, Button: 2 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement, Button: 2 단계, 이미지 2/2
    • Carefully remove the battery by lifting it straight up from its place.

    • Keep in mind that the red and black battery wires are attached to the motherboard. Handle these with care.

  3. Afterglow Wireless PS3 Controller Button Replacement: 3 단계, 이미지 1/1
    • Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.

  4. Afterglow Wireless PS3 Controller Button Replacement: 4 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement: 4 단계, 이미지 2/2
    • Jiggle both joy stick control mini-motherboards out of their holding place.

    • Set aside the mini-motherboards so you can access the main motherboard.

  5. Afterglow Wireless PS3 Controller Button Replacement: 5 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement: 5 단계, 이미지 2/2
    • Pull both vibration motors straight up from their holding place.

  6. Afterglow Wireless PS3 Controller Button Replacement: 6 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement: 6 단계, 이미지 2/2
    • Unscrew the two 9mm Phillips #0 screws holding the motherboard to the controller front plate.

  7. Afterglow Wireless PS3 Controller Button Replacement: 7 단계, 이미지 1/2 Afterglow Wireless PS3 Controller Button Replacement: 7 단계, 이미지 2/2
    • Detach the main motherboard fom the front pate by carefully pulling it off.

    • Be careful of the trigger buttons when pulling out the motherboard. The buttons have mini-motherboards secured in place on the front plate. Carefully pull these out.

  8. Afterglow Wireless PS3 Controller Button Replacement: 8 단계, 이미지 1/3 Afterglow Wireless PS3 Controller Button Replacement: 8 단계, 이미지 2/3 Afterglow Wireless PS3 Controller Button Replacement: 8 단계, 이미지 3/3
    • Pick up the controller front plate and carefully turn it over so that the buttons left in it will fall out.

    • You may want to flip it while holding it over a container so the buttons do not go bouncing away from your work space.

결론

To reassemble your device, follow these instructions in reverse order.

Aj Coello

회원 가입일: 02/17/17

789 평판

안내서 6개 작성하였습니다

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 회원

USFT-HOFFMAN-S17S19G5

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 1,004