기기를 수리하세요 커뮤니티 상점

Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement

필요한 것

  1. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: 1 단계, 이미지 1/3 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: 1 단계, 이미지 2/3 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement, Memory Ejecting Assembly: 1 단계, 이미지 3/3

    • Remove the battery cover.

    • Remove the batteries.

    편집

  2. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 2 단계, 이미지 1/1

    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

    편집

  3. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 3 단계, 이미지 1/1

    • Remove the four screws from the back side.

    편집

  4. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 4 단계, 이미지 1/2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 4 단계, 이미지 2/2

    • Remove the sticky black dot.

    • Remove the hidden screw.

    편집

  5. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 5 단계, 이미지 1/2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 5 단계, 이미지 2/2

    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

    편집

  7. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 6 단계, 이미지 1/1

    • Remove the rear cover.

    • Be careful not to lose the spring inside.

    편집

  8. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 7 단계, 이미지 1/1

    • Pull back the front cover so that you can dislodge the side cover.

    편집

  9. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 8 단계, 이미지 1/1

    • Unfold the device and be careful not to tear the black and red power supply wires.

    편집

  10. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 9 단계, 이미지 1/1

    • Remove the four screws from the motherboard.

    편집

  11. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 10 단계, 이미지 1/1

    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

    편집

  12. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 11 단계, 이미지 1/1

    • Remove the side cover.

    • Flip the device and locate the ejecting assembly.

    편집

  13. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 12 단계, 이미지 1/1

    • Remove the grey button.

    편집

  14. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 13 단계, 이미지 1/1

    • Push the metal arm the button was on all the way up.

    편집

  15. Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 14 단계, 이미지 1/2 Aiptek Pocket DVII 1.3M LCD Memory Ejecting Assembly Replacement: 14 단계, 이미지 2/2

    • Pop the main metal arm out of the other metal arm's socket.

    • Position the arm vertically like in the first picture. The arm should come off easily.

    • Replace the ejecting arm.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Gyozo Aba Hivatal

회원 가입일: 01/21/15

561 평판

안내서 5개 작성하였습니다

배지: 14

배지 +11개 더

팀

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015 회원

USFT-BROWN-W15S6G4

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 109