주요 콘텐츠로 건너뛰기

Aiptek Pocket DVII 1.3M LCD Display Screen Replacement

필요한 것

  1. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 1 단계, 이미지 1/3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 1 단계, 이미지 2/3 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement, Display Screen: 1 단계, 이미지 3/3
    • Remove the battery cover.

    • Remove the batteries.

  2. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 2 단계, 이미지 1/2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 2 단계, 이미지 2/2
    • Remove the sticky black dots.

    • Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

  3. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 3 단계, 이미지 1/1
    • Using an opening tool, separate the cover from the screen.

    • The cover won't completely come off. This will happen in the next step.

    • Don't be afraid to use a little more force.

  4. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 4 단계, 이미지 1/1
    • Using an opening tool remove the outside cover of the flip screen.

    • Move the cover towards the lens and then away from the screen.

  5. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 5 단계, 이미지 1/2 Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 5 단계, 이미지 2/2
    • With the cover off, push the brown locking mechanism up, so the picture cable can be remove.

    • You only need to unplug the bottom cable in the picture.

  6. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 6 단계, 이미지 1/1
    • Remove the two black screws from the circuit board.

  7. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 7 단계, 이미지 1/1
    • With the opening tool, pop up the screen assembly.

    • The screen is glued to the black cover. Use more force if needed.

  8. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 8 단계, 이미지 1/1
    • As in step 5, push up the brown locking mechanism of the remaining cable.

    • Unplug the picture cable.

  9. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 9 단계, 이미지 1/1
    • Turn the circuit board over and with a soldering gun remove the two wires on each end.

    • Use a screwdriver to pull the loosened wire away.

  10. Aiptek Pocket DVII 1.3M LCD Display Screen Replacement: 10 단계, 이미지 1/1
    • With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

결론

To reassemble your device, follow these instructions in reverse order.

Gyozo Aba Hivatal

회원 가입일: 01/21/15

561 평판

안내서 5개 작성하였습니다

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015 회원

USFT-BROWN-W15S6G4

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 343