주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Use this guide to replace the logic board in your Alcatel Jitterbug Smart

부품

지정된 부품이 없습니다.

  1. Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone. Lift open case by the corner nearest the divot and remove it from the phone.
    • Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.

    • Lift open case by the corner nearest the divot and remove it from the phone.

  2. Remove the 13 1 mm Phillips screws with JIS #000 Screwdriver. Remove the 13 1 mm Phillips screws with JIS #000 Screwdriver.
    • Remove the 13 1 mm Phillips screws with JIS #000 Screwdriver.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    키트 쇼핑하기

    Enough RAM
    For All The Tabs

    키트 쇼핑하기
  4. Gently pry off the Mid frame from the phone using a Metal Spudger. Gently pry off the Mid frame from the phone using a Metal Spudger.
    • Gently pry off the Mid frame from the phone using a Metal Spudger.

  5. Use the Plastic Opening tools to gently dislodge the broken camera from the inside of the phone. Use a tweezers to pull the camera connector from its port.
    • Use the Plastic Opening tools to gently dislodge the broken camera from the inside of the phone.

    • Use a tweezers to pull the camera connector from its port.

    • Be careful not to tear the camera from its connection.

결론

To reassemble your device, follow these instructions in reverse order.

Gavin Le

회원 가입일: 2018년 02월 13일

367 평판

안내서 3개 작성하였습니다

USF Tampa, Team S11-G4, Cheng Spring 2018 USF Tampa, Team S11-G4, Cheng Spring 2018 회원

USFT-CHENG-S18S11G4

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 99