Skip to main content
  1. Locate the small indent on the lower left corner. Use your fingers or a small plastic opening tool to lift the back cover off. Use your fingers or a small plastic opening tool to lift the back cover off.
    • Locate the small indent on the lower left corner.

    • Use your fingers or a small plastic opening tool to lift the back cover off.

  2. Locate the indent between the battery and your phone. Use your finger or a small plastic opening tool to lift the battery free. Use your finger or a small plastic opening tool to lift the battery free.
    • Locate the indent between the battery and your phone.

    • Use your finger or a small plastic opening tool to lift the battery free.

  3. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone.
    • Using the Phillips screw driver, remove the 9 screws from the phone.

  4. Using your prying tool, place it between the screen and the back cover and pry it open.
    • Using your prying tool, place it between the screen and the back cover and pry it open.

  5. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  6. Disconnect the camera from the mother board with your prying tool. Disconnect the camera from the mother board with your prying tool.
    • Disconnect the camera from the mother board with your prying tool.

  7. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone.
    • Remove both of this cables located on the bottom left corner of the phone.

  8. Remove the volume and power button using your prying tool. Go underneath the bronze plate with your prying tool and carefully pry it off.
    • Remove the volume and power button using your prying tool.

    • Go underneath the bronze plate with your prying tool and carefully pry it off.

  9. Remove this pice that is to the right of the camera with your prying tool.
    • Remove this pice that is to the right of the camera with your prying tool.

  10. Remove this two pieces by using your tweezers. Carefully pull them off. There will be a black flap where you can place your tweezers to pull.
    • Remove this two pieces by using your tweezers.

    • Carefully pull them off. There will be a black flap where you can place your tweezers to pull.

  11. Using you prying tool, go in-between the phone.
    • Using you prying tool, go in-between the phone.

    • Carefully pry it off.

결론

To reassemble your device, follow these instructions in reverse order.

Yahriel Negrete

회원 가입일: 2018년 02월 08일

291 평판

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 100