주요 콘텐츠로 건너뛰기

Alcatel One Touch Evolve 2 Rear Speaker Replacement

필요한 것

  1. Alcatel One Touch Evolve 2 Rear Speaker Replacement, Back Frame: 1 단계, 이미지 1/3 Alcatel One Touch Evolve 2 Rear Speaker Replacement, Back Frame: 1 단계, 이미지 2/3 Alcatel One Touch Evolve 2 Rear Speaker Replacement, Back Frame: 1 단계, 이미지 3/3
    • Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.

    • Remove the back cover using one of the plastic opening tools and the slit in one of the corners.

    • Be gentle when prying so as to not wear out the tool.

  2. Alcatel One Touch Evolve 2 Rear Speaker Replacement: 2 단계, 이미지 1/1
    • Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

  3. Alcatel One Touch Evolve 2 Rear Speaker Replacement: 3 단계, 이미지 1/1
    • Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

  4. Alcatel One Touch Evolve 2 Rear Speaker Replacement: 4 단계, 이미지 1/3 Alcatel One Touch Evolve 2 Rear Speaker Replacement: 4 단계, 이미지 2/3 Alcatel One Touch Evolve 2 Rear Speaker Replacement: 4 단계, 이미지 3/3
    • Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

  5. Alcatel One Touch Evolve 2 Rear Speaker Replacement: 5 단계, 이미지 1/2 Alcatel One Touch Evolve 2 Rear Speaker Replacement: 5 단계, 이미지 2/2
    • Pull the rear frame off with your hands.

  6. Alcatel One Touch Evolve 2 Rear Speaker Replacement, Rear Speaker: 6 단계, 이미지 1/1
    • Gently loosen the rear speaker by using one of the plastic opening tools and prying the speaker off its metal base.

    • The adhesive holding the speaker to the base may be strong depending on the age and condition of the phone. Adjust your prying force if necessary.

  7. Alcatel One Touch Evolve 2 Rear Speaker Replacement: 7 단계, 이미지 1/1
    • De-solder the black and red wires of the speaker using a soldering tool.

    • If you need instructions on how to solder/desolder electronic connections, here is a link to the Soldering Technique Guide

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Andrew Bai

회원 가입일: 01/30/17

634 평판

안내서 5개 작성하였습니다

IUPUI, Team 1-3, Baechle Spring 2017 IUPUI, Team 1-3, Baechle Spring 2017 회원

IUPUI-BAECHLE-S17S1G3

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 441