기기를 수리하세요 커뮤니티 상점

Alienware 17 R2 Wireless Card Replacement

필요한 것

  1. Alienware 17 R2 Wireless Card Replacement, Removing the Screw: 1 단계, 이미지 1/1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Remove the screw that secures the wireless-card bracket and the wireless card to the system board.

    번역하기

  2. Alienware 17 R2 Wireless Card Replacement, Lifting the Card Bracket: 2 단계, 이미지 1/1

    • Lift the wireless-card bracket off the wireless card.

    번역하기

  3. Alienware 17 R2 Wireless Card Replacement, Disconnecting Antenna Cables: 3 단계, 이미지 1/1

    • Disconnect the antenna cables from the wireless card.

    번역하기

  5. Alienware 17 R2 Wireless Card Replacement, Removing the Wireless Card: 4 단계, 이미지 1/1

    • Lift and slide the wireless card from the wireless-card slot.

    번역하기

    • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

    • Align the notch on the wireless card with the tab on the wireless-card slot.

    번역하기

  7. Alienware 17 R2 Wireless Card Replacement, Sliding the Wireless Card: 6 단계, 이미지 1/1

    • Slide the wireless card at an angle into the wireless-card slot.

    번역하기

  8. Alienware 17 R2 Wireless Card Replacement, Connecting Cables to the Wireless Card: 7 단계, 이미지 1/1

    • Connect the antenna cables to the wireless-card.

    • The following is the antenna-cable color color scheme for the wireless card: Main (white triangle) = White Auxiliary (black triangle) = Black

    번역하기

  9. Alienware 17 R2 Wireless Card Replacement, Aligining the Screw Holes: 8 단계, 이미지 1/1

    • Align the screw hole on the wireless-card bracket with the screw hole on the wireless card.

    번역하기

  10. Alienware 17 R2 Wireless Card Replacement, Replacing the Screw: 9 단계, 이미지 1/1

    • Replace the screw that secures the wireless-card bracket and the wireless card to the system board.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Terrence15

회원 가입일: 12/18/17

79,121 평판

안내서 441개 작성하였습니다

배지: 28

배지 +25개 더

팀

RampUP America, Inc. RampUP America, Inc. 회원

Community

42 회원들

안내서 1,985개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 717