주요 콘텐츠로 건너뛰기

Alienware M15x GPU Replacement

필요한 것

  1. Alienware M15x GPU Replacement, GPU: 1 단계, 이미지 1/1
    • Turn the laptop over so that the bottom is facing upward.

  2. Alienware M15x GPU Replacement: 2 단계, 이미지 1/1
    • Release the battery latch and flip the battery out.

  3. Alienware M15x GPU Replacement: 3 단계, 이미지 1/2 Alienware M15x GPU Replacement: 3 단계, 이미지 2/2
    • Remove the two 4mm screws using a Phillips #1 screwdriver.

    • Remove the compartment door by sliding it away from the battery.

  4. Alienware M15x GPU Replacement: 4 단계, 이미지 1/1
    • Remove the four 4mm screws with the Phillips #1 screwdriver.

  5. Alienware M15x GPU Replacement: 5 단계, 이미지 1/1
    • Position the laptop vertically so that the hinge is facing up and the laptop is slightly open toward the ground

    • The laptop position should resemble an upside-down V shape.

    • Locate the panel and pry open using a plastic opening tool.

  6. Alienware M15x GPU Replacement: 6 단계, 이미지 1/3 Alienware M15x GPU Replacement: 6 단계, 이미지 2/3 Alienware M15x GPU Replacement: 6 단계, 이미지 3/3
    • Position the laptop normally, with the bottom on the ground and the screen flipped up towards you.

    • Lift the power button panel using the plastic opening tool.

    • Disconnect the ribbon cable by using tweezers to unclip the two small black clips. Remove power button panel.

  7. Alienware M15x GPU Replacement: 7 단계, 이미지 1/1
    • Remove the two 4mm screws with a Phillips #1 screwdriver.

  8. Alienware M15x GPU Replacement: 8 단계, 이미지 1/2 Alienware M15x GPU Replacement: 8 단계, 이미지 2/2
    • Use a Phillips #1 screwdriver to remove the 4mm screw from the exhaust port cover.

    • Remove the exhaust port cover entirely.

  9. Alienware M15x GPU Replacement: 9 단계, 이미지 1/3 Alienware M15x GPU Replacement: 9 단계, 이미지 2/3 Alienware M15x GPU Replacement: 9 단계, 이미지 3/3
    • Use a Phillips #0 screwdriver to remove the two 3mm screws holding the fan in place, then unclip the electrical connection using tweezers.

  10. Alienware M15x GPU Replacement: 10 단계, 이미지 1/1
    • Remove the heat sink by loosening the 4 screws with a Phillips #0 screwdriver.

  11. Alienware M15x GPU Replacement: 11 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the two screws.

    • Remove the GPU from the laptop.

    • When replacing the GPU, it is important to reapply thermal paste in a small line along the length of the chip.

결론

To reassemble your device, follow these instructions in reverse order.

Tomas Kronmark

회원 가입일: 01/22/18

193 평판

안내서 1개 작성함

Cal Poly, Team S11-G3, Banghart Winter 2018 Cal Poly, Team S11-G3, Banghart Winter 2018 회원

CPSU-BANGHART-W18S11G3

5 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 19

전체 시간: 1,616