소개

Upgrade your hard drive for more storage space.

  1. First, take off the battery by moving the latch to the left and pulling it up.
    • First, take off the battery by moving the latch to the left and pulling it up.

    댓글 쓰기

  2. Then unscrew the two Phillips screws.
    • Then unscrew the two Phillips screws.

    • Pull the cover down, then up, revealing the internals

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Unscrew the four screws indicated

    • Pull on the tab that says "Pull" and remove the Hard Drive

    댓글 쓰기

    • With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Gabe

회원 가입일: 2010년 04월 09일

8,033 평판

안내서 3개 작성하였습니다

Master Techs Master Techs 회원

Community

279 회원들

안내서 758개 작성하였습니다

Thanks, great guide. Was a bit confused between steps three and four but I simply had to remove the metal casing around the hard drive.

Hasan - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 17

지난 30일: 83

전체 시간: 30,993