주요 콘텐츠로 건너뛰기

Alienware m15 R6 Base Cover Replacement

필요한 것

  1. Alienware m15 R6 Base Cover Replacement, Base Cover: 1 단계, 이미지 1/1
    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

  2. Alienware m15 R6 Base Cover Replacement: 2 단계, 이미지 1/1
    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

  3. Alienware m15 R6 Base Cover Replacement: 3 단계, 이미지 1/1
    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

결론

To reassemble your device, follow these instructions in reverse order.

Andrzej

회원 가입일: 02/17/23

1,672 평판

안내서 18개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 21

전체 시간: 248