기기를 수리하세요 커뮤니티 상점

Alienware m15 R6 I/O board Replacement

소개

Prerequisites

  1. Follow the procedure in Before working inside your computer.

필요한 것

  1. Alienware m15 R6 I/O board Replacement, Base Cover: 1 단계, 이미지 1/1

    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

    편집

  2. Alienware m15 R6 I/O board Replacement: 2 단계, 이미지 1/1

    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

    편집

  4. Alienware m15 R6 I/O board Replacement: 3 단계, 이미지 1/1

    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

    편집

  5. Alienware m15 R6 I/O board Replacement, I/O board: 4 단계, 이미지 1/1

    • Lift the system board Mylar and open the latch to disconnect the I/O-board cable from the system board.

    • Open the latch to disconnect the I/O-board cable from the I/O board.

    • Remove the screw (M2x4) that secures the I/O board to the palm-rest and keyboard assembly.

    • Loosen the captive screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly. (skip for NVIDIA GeForce RTX 3050 Ti discrete GPU controller)

    • Lift the I/O board off the palm-rest and keyboard assembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Andrzej

회원 가입일: 02/17/23

1,672 평판

안내서 18개 작성하였습니다

배지: 12

배지 +9개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 97