기기를 수리하세요 커뮤니티 상점

Altec Lansing BoomJacket 2 Disassembly

소개

After completing this guide you will be ready to repair or replace any of the components inside your device.

필요한 것

  1. Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: 1 단계, 이미지 1/2 Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: 1 단계, 이미지 2/2

    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

    편집

  2. Altec Lansing BoomJacket 2 Disassembly: 2 단계, 이미지 1/2 Altec Lansing BoomJacket 2 Disassembly: 2 단계, 이미지 2/2

    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    편집

  4. Altec Lansing BoomJacket 2 Disassembly: 3 단계, 이미지 1/1

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    편집

  5. Altec Lansing BoomJacket 2 Disassembly: 4 단계, 이미지 1/2 Altec Lansing BoomJacket 2 Disassembly: 4 단계, 이미지 2/2

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    편집

  6. Altec Lansing BoomJacket 2 Disassembly: 5 단계, 이미지 1/1

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    편집

  7. Altec Lansing BoomJacket 2 Disassembly: 6 단계, 이미지 1/1

    • Gently pull apart the front panel from the base of the speaker.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Zach Braaten

회원 가입일: 07/12/18

516 평판

안내서 4개 작성하였습니다

배지: 8

배지 +5개 더

팀

UW Tacoma, Team S1-G4, Cardinal Summer 2018 UW Tacoma, Team S1-G4, Cardinal Summer 2018 회원

UWT-CARDINAL-SU18S1G4

4 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 1,491