기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Altec Lansing BoomJacket Power Button Replacement

소개

Will your device not turn on or off? Your power button is likely the reason.

필요한 것

  1. Altec Lansing BoomJacket Power Button Replacement, Case Removal: 1 단계, 이미지 1/1

    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

    번역하기

  2. Altec Lansing BoomJacket Power Button Replacement: 2 단계, 이미지 1/1

    • Remove the outer black rubber housing of the speaker.

    번역하기

  3. Altec Lansing BoomJacket Power Button Replacement: 3 단계, 이미지 1/1

    • Remove the inner blue rubber housing from the speaker.

    번역하기

  4. Altec Lansing BoomJacket Power Button Replacement: 4 단계, 이미지 1/1

    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

    번역하기

  5. Altec Lansing BoomJacket Power Button Replacement: 5 단계, 이미지 1/2 Altec Lansing BoomJacket Power Button Replacement: 5 단계, 이미지 2/2

    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

    번역하기

  7. Altec Lansing BoomJacket Power Button Replacement: 6 단계, 이미지 1/1

    • Using the size PH1 screwdriver remove the screws exposed from the rubber stoppers (4 + 2).

    번역하기

  8. Altec Lansing BoomJacket Power Button Replacement: 7 단계, 이미지 1/1

    • Pull the case apart and you will be able to see all the components inside the speaker.

    번역하기

  9. Altec Lansing BoomJacket Power Button Replacement, Power Button: 8 단계, 이미지 1/1

    • The battery will be sitting right behind the speakers when the case is open.

    번역하기

  10. Altec Lansing BoomJacket Power Button Replacement: 9 단계, 이미지 1/2 Altec Lansing BoomJacket Power Button Replacement: 9 단계, 이미지 2/2

    • Unplug and disconnect the battery from the motherboard.

    번역하기

  11. Altec Lansing BoomJacket Power Button Replacement: 10 단계, 이미지 1/1

    • Using a size PH1 screwdriver, remove the two screws.

    번역하기

  12. Altec Lansing BoomJacket Power Button Replacement: 11 단계, 이미지 1/2 Altec Lansing BoomJacket Power Button Replacement: 11 단계, 이미지 2/2

    • You will now see the motherboard for the power button.

    • Remove the 2 screws holding the motherboard into place.

    번역하기

  13. Altec Lansing BoomJacket Power Button Replacement: 12 단계, 이미지 1/1

    • Pick up the motherboard and take it out of the slot.

    번역하기

  14. Altec Lansing BoomJacket Power Button Replacement: 13 단계, 이미지 1/1

    • Disconnect the power button motherboard from the speaker motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Ryan Byrnes

회원 가입일: 04/12/17

872 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

Eastern Washington University, Team S2-G2, Rowley Spring 2017 Eastern Washington University, Team S2-G2, Rowley Spring 2017 회원

EWU-ROWLEY-S17S2G2

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

Current speaker won’t turn on even though charging light looks all good so came across these instructions.

Thinking it’s the power button on my speaker that’s the issue.

Assuming these instructions are assuming you are replacing the power button motherboard? Where could I source one?

Cat Moure - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 20

30일 전: 95

전체 시간: 20,486