주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Altec Lansing BoomJacket Speaker Replacement

필요한 것

  1. Altec Lansing BoomJacket Speaker Replacement, Speaker: 1 단계, 이미지 1/1
    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

  2. Altec Lansing BoomJacket Speaker Replacement: 2 단계, 이미지 1/1
    • Remove the outer black rubber housing of the speaker.

  3. Altec Lansing BoomJacket Speaker Replacement: 3 단계, 이미지 1/1
    • Remove the inner blue rubber housing from the speaker.

  4. Altec Lansing BoomJacket Speaker Replacement: 4 단계, 이미지 1/1
    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

  5. Altec Lansing BoomJacket Speaker Replacement: 5 단계, 이미지 1/2 Altec Lansing BoomJacket Speaker Replacement: 5 단계, 이미지 2/2
    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

  6. Altec Lansing BoomJacket Speaker Replacement: 6 단계, 이미지 1/1
    • Using the size PH1 screwdriver remove the screws (4 around each speaker).

  7. Altec Lansing BoomJacket Speaker Replacement: 7 단계, 이미지 1/1
    • Pull the case apart and you will be able to see all the components inside the speaker.

  8. Altec Lansing BoomJacket Speaker Replacement: 8 단계, 이미지 1/1
    • Remove the speakers (not entirely because of the wiring) by gently pulling each speaker up.

결론

To reassemble your device, follow these instructions in reverse order.

Ryan Byrnes

회원 가입일: 04/12/17

872 평판

안내서 5개 작성하였습니다

댓글 2개

Where do I find the correct part to replace the charging port on my boom jacket?

Rockstar - 답글

1.1" External Magnetic Type Round Slim Plastic Shell Speaker 8 Ohm 0.25W 2 Pcs

Eeshton -

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 735