기기를 수리하세요 커뮤니티 상점

Altec Lansing VersA Smart Motherboard Replacement

소개

If you are having various issues with your device, this guide will show you how to remove and replace the motherboard.

필요한 것

  1. Altec Lansing VersA Smart Motherboard Replacement, External Panels: 1 단계, 이미지 1/1

    • Remove external rubber cover.

    편집

  2. Altec Lansing VersA Smart Motherboard Replacement: 2 단계, 이미지 1/2 Altec Lansing VersA Smart Motherboard Replacement: 2 단계, 이미지 2/2

    • Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.

    • Use a lever motion, push the tool down, lifting the speaker face.

    • Use fingers to grip and remove speaker face.

    • Repeat on reverse side to remove the second speaker face.

    편집

  3. Altec Lansing VersA Smart Motherboard Replacement: 3 단계, 이미지 1/2 Altec Lansing VersA Smart Motherboard Replacement: 3 단계, 이미지 2/2

    • Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side.

    • Remove the seven 14mm screws using the Phillips #1 screwdriver.

    편집

  5. Altec Lansing VersA Smart Motherboard Replacement: 4 단계, 이미지 1/1

    • Reorient speaker so Bluetooth and power buttons are now on the right-hand side.

    • Separate the two panels along the crease.

    • Blue plastic opening tool may be needed to separate panels.

    • Remove the panel with no buttons to expose internal area of the device.

    • Motherboard and all internal components are under this panel.

    편집

  6. Altec Lansing VersA Smart Motherboard Replacement, Motherboard: 5 단계, 이미지 1/1

    • Remove the five wiring attachments (for the volume board, bluetooth board, speakers, and microUSB) from their connection to the motherboard by pulling slightly.

    편집

  7. Altec Lansing VersA Smart Motherboard Replacement: 6 단계, 이미지 1/2 Altec Lansing VersA Smart Motherboard Replacement: 6 단계, 이미지 2/2

    • Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver.

    편집

  8. Altec Lansing VersA Smart Motherboard Replacement: 7 단계, 이미지 1/1

    • Remove the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Kendra Pennington

회원 가입일: 09/10/18

118 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

University of Alabama, Team S1-G3, Bedsole Fall 2018 University of Alabama, Team S1-G3, Bedsole Fall 2018 회원

UA-BEDSOLE-F18S1G3

3 회원들

안내서 6개 작성하였습니다

댓글 한 개

Where can you buy replacement PCBS for ALTEC products?

Kelly Raile - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 5

전체 시간: 324