주요 콘텐츠로 건너뛰기

소개

Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2012.

This guide shows the removal of just one disc, but the procedure for the other two discs is identical.

  1. Before you begin, be sure that the sander is unplugged and powered off.
    • Before you begin, be sure that the sander is unplugged and powered off.

    • Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

  2. Peel the hook-and-loop sandpaper disc off of the driver assembly.
    • Peel the hook-and-loop sandpaper disc off of the driver assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Miles Robinson

회원 가입일: 2019년 03월 04일

839 평판

안내서 7개 작성하였습니다

The Home Depot The Home Depot 회원

Community

7,163 회원들

안내서 1,011개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 22