주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Use this guide to replace the blades on your Andis T Outliner Trimmer with T Blade Model G.

부품

지정된 부품이 없습니다.

  1. Complete this step to reduce the risk of burns, fire, electric shock, or injury. Turn the control on the trimmers to "off". Remove the plug from the electrical outlet.
    • Complete this step to reduce the risk of burns, fire, electric shock, or injury.

    • Turn the control on the trimmers to "off".

    • Remove the plug from the electrical outlet.

  2. Remove the two blade screws from the top blade of the trimmer. Remove the two blade screws from the top blade of the trimmer. Remove the two blade screws from the top blade of the trimmer.
    • Remove the two blade screws from the top blade of the trimmer.

  3. Lift the top blade from the device. The bottom blade is attached, but not secured, to the underside of the top blade.
    • Lift the top blade from the device.

    • The bottom blade is attached, but not secured, to the underside of the top blade.

  4. Flip the top blade over. Lift the bottom blade from the top blade.
    • Flip the top blade over.

    • Lift the bottom blade from the top blade.

  5. Clean or lubricate the device if necessary. Clean or lubricate the device if necessary.
    • Clean or lubricate the device if necessary.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

David Taylor

회원 가입일: 2014년 10월 08일

151 평판

안내서 1개 작성함

USF Tampa, Team 1-34, Donnelly Fall 2014 USF Tampa, Team 1-34, Donnelly Fall 2014 회원

USFT-DONNELLY-F14S1G34

1 회원

안내서 1개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 51

전체 시간: 3,759