주요 콘텐츠로 건너뛰기

Apex Digital DTV Converter Box Power supply Board replacement

필요한 것

  1. Apex Digital DTV Converter Box Power supply Board replacement, Power Board: 1 단계, 이미지 1/1
    • Unplug your device from the wall outlet.

  2. Apex Digital DTV Converter Box Power supply Board replacement: 2 단계, 이미지 1/1
    • Remove the screws on the sides and rear. There are two on each side and four on the back.

    • Note: only remove the black ones (the silver ones stay for now). You should have removed eight identical screws by now.

  3. Apex Digital DTV Converter Box Power supply Board replacement: 3 단계, 이미지 1/1
    • Lift the top cover up and toward you simultaneously. It shouldn't require very much force.

  4. Apex Digital DTV Converter Box Power supply Board replacement: 4 단계, 이미지 1/1
    • Locate the power board inside the converter box.

    • Circled in red in the picture.

  5. Apex Digital DTV Converter Box Power supply Board replacement: 5 단계, 이미지 1/1
    • Remove this plug

    • You will need to squeeze the locking lever to release it. don't pull too hard.

    • Circled in red in the picture.

  6. Apex Digital DTV Converter Box Power supply Board replacement: 6 단계, 이미지 1/1
    • Remove this plug from the main board. It is not detachable from the power board end.

    • Be gentle.

    • Circled in red in the picture

  7. Apex Digital DTV Converter Box Power supply Board replacement: 7 단계, 이미지 1/1
    • Remove one last cable. This one leads to the front panel

    • Be gentle.

    • Circled in red

  8. Apex Digital DTV Converter Box Power supply Board replacement: 8 단계, 이미지 1/1
    • Remove the power cord from its slot in the casing. This will make it easier to remove the power board.

    • Circled in blue

  9. Apex Digital DTV Converter Box Power supply Board replacement: 9 단계, 이미지 1/1
    • Remove the four silver colored philips screws holding the power board in.

    • Marked in pink (eeww)

  10. Apex Digital DTV Converter Box Power supply Board replacement: 10 단계, 이미지 1/1
    • Lift the power board out. Be careful to not touch the bottom of the power board. even when unplugged, it may still hold a charge.

    • Here is the empty spot.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Michel

회원 가입일: 06/18/10

288 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 8,999