기기를 수리하세요 커뮤니티 상점

Apex TM772 Speaker Replacement

소개

Instructions to remove and replace a damaged or non-functioning internal speaker.

필요한 것

  1. Apex TM772 Speaker Replacement, Casing: 1 단계, 이미지 1/1

    • Begin by inserting the plastic opening tool into the seam between the back and front of the case and carefully pry the back from the front.

    편집

  2. Apex TM772 Speaker Replacement: 2 단계, 이미지 1/1

    • Moving along the seam continue to pry the case apart.

    • The internal speaker is adhered to the inside of the back casing. There are two wires that connect the speaker to the circuit board and may be damaged if care is not taken. Once open the speaker may be removed from the back casing by removing the tape holding the speaker with either tweezers or your fingers.

    편집

  4. Apex TM772 Speaker Replacement: 3 단계, 이미지 1/1

    • The back panel should now be disconnected from the device. This provides access to the components of the device for repairing and replacing parts of the tablet.

    편집

  5. Apex TM772 Speaker Replacement, Speaker: 4 단계, 이미지 1/1

    • Remove the tape holding the speaker to the back panel.

    편집

  6. Apex TM772 Speaker Replacement: 5 단계, 이미지 1/1

    • For soldering instructions, refer to the iFixit Soldering Guide

    • Locate the soldering points where the wires have been connected to the circuit board.

    편집

  7. Apex TM772 Speaker Replacement: 6 단계, 이미지 1/1

    • Desolder the red wire the positive (+)

    • Desolder the black wire to the negative (-).

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Doran Van Bemmel

회원 가입일: 04/12/17

601 평판

안내서 6개 작성하였습니다

배지: 5

배지 +2개 더

팀

Eastern Washington University, Team S2-G6, Rowley Spring 2017 Eastern Washington University, Team S2-G6, Rowley Spring 2017 회원

EWU-ROWLEY-S17S2G6

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 93