소개

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

  1. Turn computer over.
    • Turn computer over.

    • Remove battery expansion cover and battery.

    댓글 쓰기

  2. With monitor hinge at the bottom, remove the two top center screws.
    • With monitor hinge at the bottom, remove the two top center screws.

    Not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - 답글

    The Screws are T8!

    Willy Kaiser - 답글

    • Remove top left and top right screws.

    Also not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - 답글

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove middle left and middle right screws.

    댓글 쓰기

    • Open computer kickstands.

    • Remove screws underneath each kickstand.

    Again not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - 답글

    • Lift keyboard from bottom and take out of shell.

    댓글 쓰기

    • Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

    • Removing both ribbon cables from the motherboard will leave the clamps like so.

    • From here you can access the logic board, hard drive, and floppy drive.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Mark McNeff

회원 가입일: 2011년 04월 20일

469 평판

안내서 2개 작성하였습니다

http://tim.id.au/laptops/apple/powerbook... (PDF)

Apple Service Source: PowerBook 500 Series

Guides for everything.

tas - 답글

Thanks been trying to fix this for a long time

Luke Legg - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 5

지난 30일: 22

전체 시간: 4,315