소개

This repair will need:

A T8 Torx screwdriver.

부품

부품은 필요하지 않습니다.

After completing the initial disassembly, you may proceed to hard drive replacement.
  • After completing the initial disassembly, you may proceed to hard drive replacement.

After completing the initial disassembly, you may proceed to hard drive replacement.

Aubrey - 답글

First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame. Next, you will remove the mounting frame and the plastic shield.
  • First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.

  • Next, you will remove the mounting frame and the plastic shield.

First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.

Aubrey - 답글

Next, you will remove the mounting frame and the plastic shield.

Aubrey - 답글

You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.
  • You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.

You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.

Aubrey - 답글

Carefully, pry the ribbon away from the pins.
  • Carefully, pry the ribbon away from the pins.

Carefully, pry the ribbon away from the pins.

Aubrey - 답글

Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.
  • Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.

Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.

Aubrey - 답글

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Tyler

회원 가입일: 2011년 04월 10일

129 평판

안내서 2개 작성하였습니다

Cal Poly, Team 20-66, Walters Spring 2011 Cal Poly, Team 20-66, Walters Spring 2011 회원

CPSU-WALTERS-S11S20G66

4 회원들

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 7

지난 30일: 21

전체 시간: 3,633