Apple Powerbook 520/540 General Disassembly

작성자 Mark McNeff (또 다른 기여자 9명)

댓글 6
즐겨찾기 3
완료: 8

Apple Powerbook 520/540 General Disassembly

난이도

보통

단계

소요 시간

30 분

소개

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

도구

Essential Electronics Toolkit

$24.99

구매
TR8 Torx Security Screwdriver

$5.99

구매

부품

지정된 부품이 없습니다.

1 단계 Apple Powerbook 520/540 General Disassembly

Remove battery expansion cover and battery.

Turn computer over.
Remove battery expansion cover and battery.

편집

2 단계

With monitor hinge at the bottom, remove the two top center screws.

With monitor hinge at the bottom, remove the two top center screws.

편집

3 단계

Remove top left and top right screws.

편집

4 단계

Remove middle left and middle right screws.

Remove middle left and middle right screws.

편집

5 단계

Open computer kickstands.
Remove screws underneath each kickstand.

편집

6 단계

Lift keyboard from bottom and take out of shell.

Lift keyboard from bottom and take out of shell.

편집

7 단계

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

Removing both ribbon cables from the motherboard will leave the clamps like so.

From here you can access the logic board, hard drive, and floppy drive.

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.
Removing both ribbon cables from the motherboard will leave the clamps like so.
From here you can access the logic board, hard drive, and floppy drive.