주요 콘텐츠로 건너뛰기

What you need

  1. Apple Powerbook 5300 Keyboard Replacement, Battery: 1 단계, 이미지 1/1
    • Position the Powerbook towards you with the monitor closed.

    • Press the battery removal latch located on the right side of the front panel.

    • Gently slide the battery out.

    • The keyboard, front pane, and hard drive are connected to the laptop's logic board via a ribbon cable. Lift up slowly on each component with one hand and disconnect the ribbons from their ports on the logic board.

  2. Apple Powerbook 5300 Keyboard Replacement, Keyboard: 2 단계, 이미지 1/1
    • Turn the laptop over and remove the three T8 torx screws from the bottom panel.

  3. Apple Powerbook 5300 Keyboard Replacement: 3 단계, 이미지 1/1
    • Turn the laptop back over and open the monitor.

    • With the monitor facing towards you, gently pull up on the keyboard panel from the bottom.

    • With the keyboard turned over as pictured, carefully remove its ribbon cable from the connection port on the logic board. Use a spudger to lift the white plastic retainer about 1/16" to release the cable.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Scott

회원 가입일: 2011년 04월 26일

155 평판

안내서 5개 작성하였습니다

Team

Cal Poly, Team 25-30, Garner Spring 2011 Cal Poly, Team 25-30, Garner Spring 2011 회원

CPSU-GARNER-S11S25G30

4 회원들

안내서 6개 작성하였습니다

0 Comments

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 2,475