부품

부품은 필요하지 않습니다.

  1. As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

    댓글 쓰기

  2. Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Use a philips screwdriver to remove the metal heat sink.

    댓글 쓰기

    • The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Vincent Monteil

회원 가입일: 2013년 07월 06일

6,197 평판

안내서 19개 작성하였습니다

Where can I find a 3rd Generation Apple TV Logic Board?

Ricky Vaughn - 답글

Good question! Did you manage to find a replacement?

Nathan Bugeja -

Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this

Mohamed Iqbal Sayyed - 답글

Mine too, where could I find a logic board replacement???

Juan Ignacio Gutierrez -

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 47

전체 시간: 7,155