기기를 수리하세요 커뮤니티 상점

Apple TV 4K Remote Battery/Charging Port Replacement

소개

This guide will show you how to access the battery and charging port in your Apple TV 4K remote for replacement.

필요한 것

  1. Apple TV 4K Remote Battery/Charging Port Replacement, Remote Battery, Charging Port: 1 단계, 이미지 1/1

    • Heat iOpener according to manufacturer's instructions.

    • Place over the face of the remote to soften the adhesive under the glass.

    편집

  2. Apple TV 4K Remote Battery/Charging Port Replacement: 2 단계, 이미지 1/2 Apple TV 4K Remote Battery/Charging Port Replacement: 2 단계, 이미지 2/2

    • Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

    편집

  3. Apple TV 4K Remote Battery/Charging Port Replacement: 3 단계, 이미지 1/1

    • Push front face forward to disengage plastic clips at the top of the remote.

    편집

  4. Apple TV 4K Remote Battery/Charging Port Replacement: 4 단계, 이미지 1/1

    • Unlatch the connector that binds the touch screen and logic board.

    편집

  6. Apple TV 4K Remote Battery/Charging Port Replacement: 5 단계, 이미지 1/1

    • Use tweezers to pull off the connector that binds the touch screen to the logic board.

    편집

  7. Apple TV 4K Remote Battery/Charging Port Replacement: 6 단계, 이미지 1/1

    • Lift the face from the body of the remote.

    편집

  8. Apple TV 4K Remote Battery/Charging Port Replacement: 7 단계, 이미지 1/2 Apple TV 4K Remote Battery/Charging Port Replacement: 7 단계, 이미지 2/2

    • Lift the latch holding back the connector to the battery.

    • Use tweezers to disconnect the battery connector.

    편집

  9. Apple TV 4K Remote Battery/Charging Port Replacement: 8 단계, 이미지 1/1

    • Remove the following screws using a T3 Torx screwdriver:

    • Eight 2mm screws

    편집

  10. Apple TV 4K Remote Battery/Charging Port Replacement: 9 단계, 이미지 1/1

    • Using a plastic spudger, gently remove the logic board from the case of the remote.

    편집

  11. Apple TV 4K Remote Battery/Charging Port Replacement: 10 단계, 이미지 1/2 Apple TV 4K Remote Battery/Charging Port Replacement: 10 단계, 이미지 2/2

    • Gently dislodge the battery from the remote case, making sure to avoid damaging the battery itself.

    • The battery should be fully removed now.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 17명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Keenan Barber

회원 가입일: 10/04/18

1,159 평판

안내서 3개 작성하였습니다

배지: 12

배지 +9개 더

팀

UW Stout, Team S6-G3, Ogden Fall 2018 UW Stout, Team S6-G3, Ogden Fall 2018 회원

UWSTOUT-OGDEN-F18S6G3

4 회원들

안내서 15개 작성하였습니다

댓글 7개

Great but can you explain how and what to use to seal it back.

With out sealing it not working properly

Thanks

Iva Sh - 답글

Hi there, where can you buy the actual battery replacement?… any links?

RLinhares - 답글

I second this. It would be great if someone could link us on where to buy the battery/charger replacement.

_ Dubb -

You won’t be able to source the original battery as it is spot welded to the lightning port cable and mobo cable, and is one unit. However if you can solder I have successfully replaced two remote batteries for about $6-$8 a battery.

sinkproductions -

I’ve searched high and low for this battery as mine will not maintain a charge for more than a few hours. I found this one for a Huawei watch: https://www.batteryclub.org/Goods/ECN106... that appears to be the correct specs, but I’m not sure it can be connected.

That noted, a new remote is only $52 and this battery is $39.50 plus shipping! So for my money a new remote is a better option since we know it will work, and it’s just $12 or so more! Nuts!

pgrobin - 답글

댓글 쓰기

조회 통계:

24 시간 전: 49

7일 전: 293

30일 전: 1,410

전체 시간: 81,729