필요한 것
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
There are five Phillips screws holding the metal brace down (In the picture I have already removed them).
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
The brace is glued in near the ir-sensor. You may have to apply a little bit force to remove it, but it will come out with just pulling. (You can pry it a little bit with a spudger or a screwdriver)
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
The only major chip located on the circuit board. (All those who have wondered about the dock's line out, I think we are clear now.)
-
댓글 한 개
Can the actual dock insert (the section the iPod would clot on top of) be used in an Apple iPod HiFi repair? (see repair article Apple iPod Hi-Fi iPod Dock Inserts Replacement)
Harrison C - 답글