주요 콘텐츠로 건너뛰기

Apple Watch Series 3 Battery Disconnection - prereq

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: 1 단계, 이미지 1/3 Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: 1 단계, 이미지 2/3 Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: 1 단계, 이미지 3/3
    • Use a Y000 driver to remove the tri-point screw securing the metal cover plate.

    • Use a pair of tweezers to remove the cover plate.

    • First open the plate all the way to unhinge the two flaps.

    • Then close it halfway to remove it completely by lifting it out.

  2. Apple Watch Series 3 Battery Disconnection - prereq: 2 단계, 이미지 1/3 Apple Watch Series 3 Battery Disconnection - prereq: 2 단계, 이미지 2/3 Apple Watch Series 3 Battery Disconnection - prereq: 2 단계, 이미지 3/3
    • On the GPS-only version it is possible to disconnect the battery immediately. For the cellular/LTE version, you need to disconnect the Force Touch gasket and fold it out of the way first, in order to disconnect the battery.

    • Disconnect the battery by prying its connector straight up.

    • Bend the connector up slightly to make sure it does not make contact by accident.

결론

To reassemble your device, follow these instructions in reverse order.

Tobias Isakeit

회원 가입일: 03/31/14

116,767 평판

안내서 188개 작성하였습니다

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,506개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 120