주요 콘텐츠로 건너뛰기

Apple Wireless Keyboard Logic Board Replacement

필요한 것

  1. Apple Wireless Keyboard Logic Board Replacement, Logic Board: 1 단계, 이미지 2개 중 1개 Apple Wireless Keyboard Logic Board Replacement, Logic Board: 1 단계, 이미지 2개 중 2개
    • Insert a metal spudger to open the plastic part under the Keyboard

  2. Apple Wireless Keyboard Logic Board Replacement: 2 단계, 이미지 1개 중 1개
    • Remove the screw

  3. Apple Wireless Keyboard Logic Board Replacement: 3 단계, 이미지 3개 중 1개 Apple Wireless Keyboard Logic Board Replacement: 3 단계, 이미지 3개 중 2개 Apple Wireless Keyboard Logic Board Replacement: 3 단계, 이미지 3개 중 3개
    • Pull the lock up and disconnect the connection cable

  4. Apple Wireless Keyboard Logic Board Replacement: 4 단계, 이미지 1개 중 1개
    • Keeping the connection cable, push out the logic board's placement

  5. Apple Wireless Keyboard Logic Board Replacement: 5 단계, 이미지 1개 중 1개
    • Unlock the latch of the logic board

  6. Apple Wireless Keyboard Logic Board Replacement: 6 단계, 이미지 1개 중 1개
    • Remove the logic board from the placement

결론

To reassemble your device, follow these instructions in reverse order.

다른 20명이 해당 안내서를 완성하였습니다.

작성자

3다른 기여자 명과 함께

Nicola

회원 가입일: 11/14/13

638 평판

안내서 1개를 작성함

댓글 9개

Hi, anyone know where its possible to buy this logic board? My bluetooth chip is apparently broken

steve - 답글

Which model of keyboard is this, because my A1255 doesn't disassemble like this - the battery terminal is solidly restrained inside the tube by means of a metal expansion ring. Doesn't seem user repairable :(

gordon jackson - 답글

My power button was stuck. The shell was dented. This was an easier way to access and remove the button so I was able to file the inside of the tube smooth so the button would move freely.

Tony - 답글

I have disassembled my keyboard as shown above, but now I need a replacement Wireless Keyboard Logic Board. I have not been able to find one. Any suggestions?

Martin Rubio - 답글

Very nice! in my case the flat cable was not properly connecting. I only found out when i opened the cap to the logic board and saw the cable sitting slanted in its connector. Put it back straight and now it works again. Cheers!!

mollymol - 답글

댓글 쓰기

조회 통계:

지난 24시간: 9

지난 7일: 43

지난 30일: 94

전체 시간: 49,166