소개
This guide details how to replace the batteries in the Apple iPod Hi-Fi speaker system.
필요한 것
-
-
Put your coin in the battery lock on the back of the the Hi-Fi. Turn the coin to the left to release the battery panel.
-
Remove the battery panel with your hands.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 6명이 해당 안내서를 완성하였습니다.
팀
Cal Poly, Team S16-G1, Livingston Spring 2018 Cal Poly, Team S16-G1, Livingston Spring 2018 회원
CPSU-LIVINGSTON-S18S16G1
5 회원들
안내서 16개 작성하였습니다
댓글 3개
good day. Does the column charge the batteries when it is plugged in?
Nope, the hifi will not charge any batteries that are installed.
Hello, I realize these comments/texts are a bit old (2019) however, I have an Apple Speaker unit from 2006 that is practically new with very little usage but stopped working due to purchasing a Bluetooth adaptor and inserting it in the rear (Audio in) jack. It had been working “great” with the Bluetooth and my iPhone for a while until the speaker unit ceased to function-turn back on (no power). Can you kindly assist in assessing-determining what might have gone wrong and what would be required to fix this problem. Many thanks ahead. Look forward to your reply.
